U.S. FLOORING COMPANY
CALL US: 866-529-3566

Tnemec series 237 - Power-Tread

Tnemec Series 237 Power-Tread is a multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system

A versatile epoxy that can be used as a primer, mortar or broadcast flooring system, Series 237 protects against impact, abrasion and mild chemicals. Series 237 can be applied by roller, broadcast or hand or power trowel. It offers longer pot life and a 2-to-1 mixing ratio. Available in clear or field and factory pigmented red, gray or beige.

  • Features & Benefits
  • 100% Solids
  • Clear-colored
  • Can be tinted in custom colors
  • Abrasion resistant
  • Mild chemical resistance
  • Impact resistant
  • Aesthetically Pleasing Appearance
    • Recommended Markets

    • Technical Data
    Generic Type Modified Polyamine Epoxy
    Common Usage A multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system installed at 1/8” to 1/4” thickness. Protects against impact, abrasion and mild chemicals.
    Colors Clear or pigmented. Can be factory or field-tinted in 16 StrataShield colors and certain custom colors. Contact your Tnemec representative for additional information. Note: Colors may not be uniform and are not intended to be finish coats—see Topcoats listed below.
    Note:
    Epoxies chalk with extended exposure to sunlight. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause yellowing to occur.
    Surfacer/Filler/
    Patcher
    Series 215
    Primer Self-Priming or Series 201
    Topcoats Series 280
    Volume Solids 100% (Mixed)